Repairs to uPVC Windows

uPVC windows are a great option for modern homes. They are easy to maintain and are durable and long-lasting. They are not susceptible to get rotten or rusty like aluminum and timber.

Cleaning and lubricating regularly UPVC windows and doors is crucial. This will help avoid unnecessary repair costs as well as increase energy efficiency.

1. Broken Glass

The broken glass in your windows can cause serious damage to your home and may even be fatal. You should take the time to make sure that your windows are in good condition.

Single-pane windows are relatively easy to replace and will usually fit into the frames of the past easily. If windows with double panes are joined by internal beading, it is more difficult to remove and replace the old panes. In this instance you'll need to locate some plastic spacers to aid the new pane in being able to fit properly into the frame of the window.

Wearing protective eyewear and thick gloves is a must when you are planning to remove the glass yourself. It is also recommended to lay down a dropcloth before you begin working on the window panes to ensure that any shards of glass fall onto the fabric, not onto the floor which could cause them to be trampled.

Once the glass has been removed, it's a good idea to cover the gap with some clear packaging tape or duct tape to prevent water and drafts from entering the home until a professional can come out and repair the window. It also acts as a barrier, deterring any intruders from getting access into your home. If the gap between the door and the window is significant, you may want to use an alarm system that has an opening. This will give you the best of both.

2. Sagging

uPVC windows and doors are a cost-effective energy efficient, durable and long-lasting alternative to timber sash windows. Over time, they can be affected by a variety of issues that include sagging. A sagging uPVC window can cause problems with light, draughts and even security. It is crucial to act as soon as you notice your uPVC windows are sagging.

To fix a window that is sagging you can try to reposition the hinges. First, you'll need to open the windows to get at the frame. After that, using a screwdriver, you can take off the top and bottom hinges and adjust them by turning them clockwise or anti-clockwise. Once you've repositioned the hinges, close the window and verify the fitting. If you're happy with the fit, tighten the screws to ensure they remain in place.

If you are unable to move the hinges, you might have to replace the seal. As time passes, rubber seals lose their elasticity and dry out and cause them to lose tightness. If this happens, it's important to replace the seal as soon as you can to ensure that your uPVC windows remain watertight and draught-proof.

uPVC handles may also loosen. This is usually due to screws that have loosened over time, but it could be due to the mechanism of the handle wears out. It's a good thing that it's simple to repair a loose uPVC window handle yourself. First, you'll need close the window and then perform an initial test fit. The corners of the sash need to align with the casing joint. If it doesn't, you can use a screwdriver or a wrench to loosen the handle and then turn the mechanism back into its original position.

3. Water Leaks

It is crucial to take action if you wake up every morning to find a smoky wall and floors that are wet. The leaks of water through windows could cause structural damage to your home and affect your ability to regulate the temperature inside your home. The most common reason for leaking uPVC windows is that the sealant around the frame has been damaged or is missing.

This is a fairly simple fix that can be completed by any DIY expert. Depending on how severe the issue is, the old caulking may need to be removed. When it is time to uPVC repair, it is important to be careful not to over-caulk. This will make your window harder to clean and decrease its energy efficiency.

It is important to check that any drainage holes are clear of debris and that the sill pan is placed properly so that it drains away from the window. In more serious instances, you may need to think about replacing the window.

Moldy sills and rotten ones are also signs of water leakage. The mold thrives in damp environments and can quickly spread across the house.

It is also important to remember that if the leak is coming from between the glass in your double glazed windows, it is more likely to be an issue with the glass seal, rather than the frame or sagging. A uPVC specialist can easily fix this problem by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

Hinges may be to blame when your uPVC window is difficult to open, or if it opens with a breeze. These are easily replaced by get more info any competent DIYer and can be completed in a matter of minutes.

Like all mechanical parts hinges will be damaged over time. It's easy to replace a hinge on a window but it's much easier if someone else helps you hold the frame.

Check that the uPVC hinges open and close in the right direction. Check for the arrows on each hinge to determine the direction in which the window should be opened.

The problem can be caused either by opening the window improperly or by a poor installation in the factory. Sending us a photo via our website is often enough to resolve the problem. We are happy to offer assistance.

It is also crucial to ensure that the hinges are lubricated regularly. This can be done by applying a light engineering oil on the hinges. We recommend using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It can also stop corrosion and decrease the chance of sticking. The ideal time to perform this every year. WD40 and other solvent-based lubricants should not be used as they could damage your uPVC windows.

5. Draughts

Draughts can be caused by several different causes. Firstly the hinges, again due to wear and tear may become displaced, which will cause an opening to appear where the sash joins the frame. If they are damaged beyond repair, it might be necessary to have them realigned. Second, the interlock can also become disaligned. It is located on the hinge's side and might require to be cleaned. In some instances, it may be necessary to replace these.

The second most frequent reason for draughts is window seals. These can become worn down or damaged over time and will allow air to escape through the gaps. This can be prevented by replacing them with high-quality weatherstripping. Replace the windows made of Upvc with low-emissivity glasses. This will help to regulate indoor temperatures, and reduce draughts.

One of the most effective methods to reduce drafts is to use a draught excluder. These are usually fabric tubes which are filled with a type of filler. They can be positioned on top of your windowsill. These will keep your home warm by blocking cold air.

With a little maintenance and repair your windows made of upvc will provide a great level of security and insulation for your home. It is important to remember that all windows eventually become worn out, and it may be more cost-effective to simply replace them instead of fixing them. So, if you're experiencing problems with your upvc windows, it's best to seek professional assistance as soon as possible.